Figure 7 shows the waveforms of a DC converter composed of one circuit. The reference current of each circuit is 25A, so the total charging current is 100A. Ib1, Ib2, Ib3 and Ib4 are the output currents of charging unit 1, unit 2, unit 3 and unit 4, respectively. IB is the charging current of the battery. Io1 is the output. Figure 8 shows the waveforms of a DC converter composed of three interleaved circuits. The reference current of each circuit is 8.33A, and the. Figure 9 shows the simulation waveforms of operation and stop test of multiple charging units, the charging reference current of charging unit 1. The main components of the DC charger cabinet include: controller, man–machine components, charging modules, lightning protector, leakage protection, circuit breaker, contactor, DC. Figures 10 shows experimental waveforms of DC charging pile with resistive load. At the beginning, the DC converter uses current creep control, when the charging current reaches 120A, it.